Uniden BCD396XT - Manual (Page 117)

Friday, November 07, 2008 117
ID Display Format
The scanner displays received ID in the following format on the second line.
Normal ID
The scanner displays as "ID:xxxx" for no-named TGID.
Example) MOT Type I ID : ID:101-1
MOT Type II : ID:12345 (Decimal Format)
: ID:123 h (Hexadecimal Format)
P25 ID : ID:12345 (Decimal Format)
: ID:1234h (Hexadecimal Format)
EDACS : ID:01-023 (AFS Format)
: ID:147 (Decimal Format)
LTR : ID:0-20-254
I-Call
The scanner displays ID as "ID:xxxxxx" for no-named TGID. In order to show that ID is I-Call, "i" is displayed
on the left end of the ID.
Example) MOT Type I I-Call : ID:i12345
MOT Type II : ID:i12345 (Decimal Format)
: ID:i1234h (Hexadecimal Format)
P25 I-Call : ID:i12345678 (Decimal Format)
: ID:i123456h (Hexadecimal Format)
EDACS I-Call : ID:i12345
I-Call wild card (i0)
The scanner will display the received I-Call for wild card.
Example) I-Call wild card : ID:i0 (while scanning)
ID:i123456 (when it receives a ID)
MOT Individual Call
The scanner displays both IDs under communication as "ID:xxxxxx-yyyyyy".
In order to show that IDs are Individual Call, "i" is displayed on the left end of IDs.
Example)
MOT Type I Individual Call : ID:i12345-i23456
MOT Type II : ID:i12345-i23456 (Decimal Format)
: ID:i1234h-i2345h (Hexadecimal Format)
P25 Individual Call : ID:i12345678 SRC
ID:i23456789 DST
(Decimal Format)
: ID:i123456h SRC
: ID:i234567h DST (Hexadecimal Format)
*If the left side ID is already named, the scanner only displays that ID’s name.
*The scanner alternately displays ID:XXXXXXXX SRC(or ID:XXXXXXh SRC) and ID:YYYYYYYY DST(or
ID:YYYYYYh DST) during a P25 individual call.