Key operation during search hold mode, Normal mode, Scroll control] knob – Uniden BCD396XT User Manual
Page 155: Scan / srch] key, Hold / /] key, L/o] key, 1 - 9, 0] key, No / pri] key, E / yes / gps] key, Menu] key
Friday, November 07, 2008
155
Key Operation During Search Hold Mode
Normal Mode
[Scroll Control] knob
Turn this knob to change the searching direction.
While monitoring a frequency, turn this knob to resume searching.
[SCAN / srch] key
Press this key to go to Scan Mode.
[Hold /
] key
Press this key to resume searching.
[L/O] key
Press this key to temporarily lock out the current frequency. When the scanner is turned off, the frequency
is unlocked.
Press this key twice in a second to permanently lock out the current frequency. When the scanner is
turned off, the frequency stays locked.
Long press this key to unlock all frequencies that are locked out in Search Mode and Close Call Mode.
[1 - 9, 0] key
Press this key to enter numbers and go to Direct Entry.
[. / no / pri] key
Press this key to input decimal point, hyphen or “i” for Direct Entry.
[E / yes / gps] key
Press this key to quickly store the current frequency.
[MENU] key
Press this key to go to the Menu Mode at Top Menu.
Function Mode
[Scroll Control] knob
Turn this knob to select a custom search range. The monitored frequency is set to the upper limit
frequency or lower limit frequency, depending on the search direction.
This knob operates only in Custom Search and does not operate in other searches.
[SCAN / srch] key
Press this key to resume searching while monitoring a frequency.
[Hold /
] key
Press this key to toggle Close Call functions.
Long press this key to start Close Call Only Mode.