Uniden BCD396XT - Manual (Page 182)

Friday, November 07, 2008 182
Display with Location Alert
This shows Location Alert System Type.
This shows that the scanner is in Location Alert.
This shows the distance to Location Alert.
This shows Location Alert name.
This shows the direction of Location Alert.
While displaying the F icon, Location Alert arrow changes to a small font.
Point Of Interest
The alerts you by ringing an alert if you approach the selected destination. The timing to which the alert
rings is set up in Set LocationInfo. Or, the alert is set up in Set Alert.
The screen displays “ALERT for” on the first line. And the second line displays “POI” as Location Alert
System Type and the distance to the destination.
Dangerous Xing / Road
The scanner may ring an Alert three times at different timings.
The screen displays "ALERT for" on the first line. And the second line displays the Location Alert System
Type and the distance to the Alert Location. An arrow which shows the direction of Alert Location is
displayed too. Alert Light is turned on.(See: Set Alert Light.)
Dangerous Xing Dangerous Road
There are three ranges for Alert, 1.0mile, 0.50 mile and 0.10 mile if you select “mile” as the unit. If you
select “km” as the unit, the alert distances are 1.0km, 0.50 km and 0.10 km. (See: Set Unit)
ALERT for
Road 0. 500mi
R183 at Beltli ne
SCAN ↑
ALERT for
POI 0. 500mi
HOME
SCAN ↑
ALERT for
Xi ng 0. 500mi
R183 at Beltli ne
SCAN ↑ ALERT for
Road 0. 340mi
Route 84
SCAN ↑