Uniden BCD396XT - Manual (Page 246)

246
<COMMAND CIN>
Get/Set Channel Info
Controller → Radio
CIN,[INDEX][\r]
CIN,[INDEX],[NAME],[FRQ],[MOD],[CTCSS/DCS],[TLOCK],[LOUT],[PRI],[ATT],[ALT],
[ALTL],[RSV],[AUDIO_TYPE],[P25NAC],[NUMBER_TAG],[ALT_COLOR],[ALT_PATTERN],
[VOL_OFFSET] [\r]
Radio → Controller
CIN,[NAME],[FRQ],[MOD],[CTCSS/DCS],[TLOCK],[LOUT],[PRI],[ATT],[ALT],[ALTL],
[REV_INDEX],[FWD_INDEX],[SYS_INDEX],[GRP_INDEX],[RSV],[AUDIO_TYPE],[P25NAC],
[NUMBER_TAG],[ALT_COLOR],[ ALT_PATTERN],[VOL_OFFSET] [\r]
CIN,OK[\r]
[INDEX] : Channel Index
[NAME] : Name (max.16char)
[FRQ] : Channel Frequency
[MOD] : Modulation (AUTO/AM/FM/NFM/WFM/FMB)
[ATT] : Attenuation (0:OFF / 1:ON)
[CTCSS/DCS] : CTCSS/DCS Status (0-231 )
*See CTCSS/DCS CODE LIST about the details of this code.
[TLOCK] : CTCSS/DCS Tone Lockout(0:OFF / 1:ON)
[LOUT] : Lockout (0:Unlocked / 1:Lockout)
[PRI] : Priority (0:OFF / 1:ON)
[ALT] : Alert Tone (0:OFF / 1-9:Tone No)
[ALTL] : Alert Tone Level (0:AUTO/ 1-15)
[REV_INDEX] : Reverse Channel Index of the Chan0nel Group
[FWD_INDEX] : Forward Channel Index of the Channel Group
[SYS_INDEX] : System Index of the Channel
[GRP_INDEX] : Group Index of the Channel
[AUDIO_TYPE] : Audio Type (0:All/1:Analog Only/2:Digital Only)
[P25NAC] : P25 NAC Status ( 0-FFF: 0-FFF / SRCH: Nac Search)
[NUMBER_TAG] : Number tag (0-999 / NONE)
[ALT_COLOR] : Alert Light color
(OFF,BLUE,RED,MAGENTA,GREEN,CYAN,YELLOW,WHITE)
[ALT_PATTERN] : Alert Light Pattern(0:ON / 1:SLow / 2:Fast)
[VOL_OFFSET] : Volume Offset (-3 - +3)
Get/Set Channel Information.
In set command, only "," parameters are not changed.
The set command is aborted if any format error is detected.
This command is only acceptable in Programming Mode.
When the system protect bit is ON, except [REV_INDEX], [FWD_INDEX],
[SYS_INDEX], [GRP_INDEX], other parameters will be send as a reserve
parameter in the Radio -> Controller command.