Uniden BCD396XT - Manual (Page 84)

Friday, November 07, 2008 84
Set C-Ch Only
These options let you set whether the scanner tracks talk group activity when it detects a Motorola or LTR
control channel. This section has the following menus:
C-Ch Only Mode
Set MOT BandPlan
C-Ch Only Mode
You can select how the scanner tracks Motorola System and LTR System. (C-Ch means Control Channel.)
On The scanner only searches for Motorola and LTR Control Channels.
Off The scanner treats all signals as normal transmission.
Press [E / yes / gps] to accept the entry and return to the previous menu.
Set MOT BandPlan
You can select one of the following options to assign a band plan that the scanner will use if it detects a
Motorola control channel. Note that if the actual received channel does not use the specified band plan,
the scanner will not follow voice traffic on the system.
The instructions for doing this are the same as for setting a band plan for a programmed system. See Edit
Band Plan (Mot) for option settings.
Set Audio AGC
When Audio AGC function is “On”, the scanner judges the volume level and changes the volume
automatically.
You can turn either Analog or Digital audio “On” or “Off”.
Analog : On / Off
Digital : On / Off
On Audio AGC is on.
Off Audio AGC is off.
Turn [Scroll Control] to focus the cursor on the item. Press [E / yes / gps] to change the setting on / off and
press [Menu] to return to the previous menu.