Uniden BCD396XT - Manual (Page 52)

Friday, November 07, 2008 52
Set Lati tude
00. 000000 N
Set C-Ch Only
You can select how the scanner tracks Motorola Systems. (C-Ch means control channel.)
On The scanner can track Motorola System by entering only the system control channels. You will not
have to program the voice channels.
Off You need to enter the control channel and voice channels.
Press [E / yes / gps] to accept the entry and return to the previous menu.
Set LocationInfo
You can set the location data for the current site.
The setting items are:
Set Latitude
Set Longitude
Set Range
Set GPS Enable
Turn [Scroll Control] to select the item and Press [E / yes / gps] to go to the settings.
Set Latitude
Press the number keys to enter latitude data. Press any number key when the cursor is in the last position
to toggle between south latitude (S) and the north latitude (N).
Press [E / yes / gps] to accept and return to the previous menu.
If “DMS:DDD⁰MM’SS.ss” is selected in Set Pos Format, the display is the following.
If “DEG:DDD.dddddd” is selected in Set Pos Format, the display is the following.
Set Lati tude
00⁰00’ 00. 00 N