Uniden BCD396XT - Manual (Page 63)

Friday, November 07, 2008 63
Set Audio Type
You can select an audio type for each channel.
All The scanner receives both Digital and Analog signals.
Digital Only The scanner receives only Digital signals.
Analog Only The scanner receives only Analog signals.
If you select “All”, the scanner returns to previous menu.
If you select “Digital Only” while setting a conventional system, you can set the P25 NAC (Network Access
Code) option from the following items. However, these options are not shown for trunked systems.
Search The scanner searches for all the P25 NACs.
Set P25 NAC The scanner search for the programmed P25 NAC.
If you select “Search”:
The scanner returns to the previous menu.
If you select “Set P25 NAC”:
Use the number keys to enter a P25 NAC. The valid range is from 0 to FFF.
Press [E / yes / gps] to set and return to the previous menu.
If you select “Analog Only” while setting a conventional system, you can set the CTCSS/DCS options from
the following items. However, these options do not display when setting for trunked system.
Off The scanner ignores all tones and opens squelch on any signal.
Search The scanner displays any tone being used, but opens squelch on any signal.
CTCSS The scanner prompts you for the appropriate setting. Squelch will open for this Channel
only if the code matches.
DCS The scanner prompts you for the appropriate setting. Squelch will open for this Channel
only if the code matches.
Set Lockout The scanner prompts you to select CTCSS/DCS settings to ignore. Squelch will not open for
this Channel only if the code matches.
*For AM or WFM modulation, this setting will be ignored.
The scanner does not detect or decode P25 signals if you are operating CTCSS/DCS Search.
If you select “Off” or “Search”:
The scanner returns to the previous menu.
If you select “CTCSS” or “DCS”:
You can select the CTCSS frequency or DCS code. (Refer to CTCSS FREQUENCY and DCS CODE for selectable
frequencies and codes.)
Turn [Scroll Control] to select.
Press [E / yes / gps] to set and return to the previous menu.