Uniden BCD396XT - Manual (Page 252)

252
<COMMAND SCO>
Get/Set Search/Close Call Settings
Controller → Radio
SCO[\r]
SCO,[RSV],[MOD],[ATT],[DLY],[RSV],[CODE_SRCH],[BSC],[REP],[RSV],[RSV],
[MAX_STORE],[RSV],[AGC_ANALOG],[AGC_DIGITAL],[P25WAITING][\r]
Radio → Controller
SCO,[RSV],[MOD],[ATT],[DLY],[RSV],[CODE_SRCH],[BSC],[REP],[RSV],[RSV],
[MAX_STORE],[RSV],[AGC_ANALOG],[AGC_DIGITAL],[P25WAITING] [\r]
SCO,OK[\r]
[MOD] : Modulation (AUTO/AM/FM/NFM/WFM/FMB)
[ATT] : Attenuation (0:OFF / 1:ON)
[DLY] : Delay Time (-10,-5,-2,0,1,2,5,10,30)
[CODE_SRCH] : CTCSS/DCS Search
(0:OFF / 1: CTCSS/DCS / 2: P25 NAC Search)
[BSC] : Broadcast Screen
(16digit: ########･･#)
(each # is 0 or 1) ||||||||･･+- Band10
0 means OFF ||||||| :
1 means ON ||||||+---- Band 2
||||||+----- Band 1
|||||+------ Reserve
||||+------- NOAA WX
|||+-------- VHF TV
||+--------- UHF TV
|+---------- FM
+----------- Pager
[REP] : Repeater Find (0:OFF / 1:ON)
[MAX_STORE] : Max Auto Store (1-256)
[AGC_ANALOG]: AGC Setting for Analog Audio (0:OFF / 1:ON)
[AGC_DIGITAL]: AGC Setting for Digital Audio (0:OFF / 1:ON)
[P25WAITING]: P25 Waiting time (0,100,200,300, .... , 900,1000)
Get/Set Search/Close Call Settings.
In set command, only "," parameters are not changed.
The set command is aborted if any format error is detected.
This command is only acceptable in Programming Mode.
<COMMAND BBS>
Get/Set Broadcast Screen Band Settings
Controller → Radio
BBS,[INDEX][\r]
BBS,[INDEX],[LIMIT_L],[LIMIT_H][\r]
Radio → Controller
BBS,[LIMIT_L],[LIMIT_H][\r]
BBS,OK[\r]
[INDEX] : Index (1-9,0 means 10)
[LIMIT_L] : Lower Limit Frequency (00000000 –99999999)
[LIMIT_H] : Upper Limit Frequency (00000000 –99999999)
Get/Set Broadcast Screen Band Settings.
This command is Only acceptable in Programming Mode.