Set longitude, Set range, Set gps enable – Uniden BCD396XT User Manual

Page 53

Advertising
background image

Friday, November 07, 2008

53

Set Longi tude

00. 000000 W

Set Longitude

Press the number keys to enter longitude data. Press any number key when the cursor is in the last
position to toggle between east longitude (E) and west longitude (W).

Press [E / yes / gps] to accept and return to the previous menu.

If “DMS:DDD⁰MM’SS.ss” is selected in Set Pos Format, the display is the following.

If “DEG:DDD.dddddd” is selected in Set Pos Format, the display is the following.

Set Range

In this menu, the setting unit is determined by the setting in Set Unit.

When you select “mile” in Set Unit, the displayed unit will be mile.

When you select “km” in Set Unit, the displayed unit will be km.

The valid setting range is from 0.5 to 125.0, in 0.5 steps.

Press [E / yes / gps] to accept the setting and return to the previous menu.

Set GPS Enable

When this option is set to “On”, the scanner will control L/O status of this site by position information
received from a GPS.

On

The L/O state of this site is automatically controlled by position information.

Off

The L/O state of this site is not influenced by GPS.

Press [E / yes / gps] to accept and return to the previous menu.

Set Longi tude

00⁰00’ 00. 00 W

Advertising