Search lockout, Search key, Service search – Uniden BCD396XT User Manual

Page 12: Broadcast screen, Attenuator, Code search, P25 nac, Volume offset, If exchange

Advertising
background image

Friday, November 07, 2008

12

Search Lockout

You can lock out up to 500 frequencies.

The limit of temporary L/O frequencies: 250

The limit of permanent L/O frequencies: 250

Locked out frequencies will be skipped in Search Mode or Close Call Mode.

You can review all locked out frequencies in Menu Mode.

Search Key

Search keys are short cuts to start searching for a single search range.

There are 3 search keys (sr1 to sr3).

Service Search

You can search preset frequencies typically used by specific agencies or groups.

The kind of Service Search is as follows: Public Safety, News, HAM Radio, Marine, Railroad, Air, CB Radio,
FRS/GMRS/MURS, Racing, FM Broadcast, Military Air, Special

Broadcast Screen

Allows the scanner to ignore hits on Pager, FM, UHF TV, VHF TV, NOAA WX and custom band frequencies.

Attenuator

You can attenuate the incoming signal for channels that get interference from strong signal sources.

You can set a global attenuator to apply attenuation to all reception.

Code Search

Rapid search for the CTCSS/DCS used during a transmission.

The scanner does not detect or decode P25 signals if you are operating CTCSS/DCS Search.

P25 NAC

P25 Network Access Code (NAC) is used to provide selective squelch operation on channels. The scanner
can also search for the NAC code that is being used on a P25 digital channel.

Volume Offset

Adjust the volume level for any channel from -3 to +3 steps to balance audio level.

IF Exchange

Switches the current frequency to use a different IF (intermediate frequency) for receiving radio signals to
avoid interference.

Advertising