Reference telephone for voice/data/fax locks – Dish Network Solo ViP 411 User Manual

Page 122

Advertising
background image

112

Troubleshooting Tables

Reference

Telephone for Voice/Data/FAX

Locks

What Is Happening

Possible Reason

What to Do

While you are making a telephone

call, you hear “clicks.”

The receiver may have tried to

send Pay-Per-View purchase

information to DISH Network

using your phone line. When the

receiver found that the telephone

was busy, it automatically

disconnected.

You do not have to do anything. You

can always use your telephone line,

because the receiver automatically

hangs up if it finds the line is busy.

You pick up the telephone to make a

call, but you do not hear a dial tone.

The receiver was sending Pay-

Per-View purchase information

to DISH Network using your

phone line. When the receiver

found that the telephone was

busy, it automatically

disconnected.

Hang up, and then pick up the

telephone again to get a dial tone.

Your computer or fax machine tries to

send a fax or modem transmission,

but fails.

The receiver was sending Pay-

Per-View purchase information

to DISH Network using your

phone line. When the receiver

found that the telephone was

busy, it automatically

disconnected. The fax or modem

found that there was no dial tone,

and cancelled the transmission.

Re-send the FAX or modem

transmission.

Your computer or fax machine was

receiving a fax or modem

transmission, but an error occurred.

The receiver may have tried to

send Pay-Per-View purchase

information to DISH Network

using your phone line during the

fax or modem call. When the

receiver found that the telephone

was busy, it automatically

disconnected. This generated

“clicks” that caused an error in

the FAX or modem transmission.

Have the sender resend the FAX or

modem transmission.

What Is Happening

Possible Reason

What to Do

You set a lock (for example, a lock on

programs by ratings), but the lock

does not take effect.

You may not have locked the

receiver.

You must lock the receiver to apply any

lock that you have set.

You forgot the password, so that you

are unable to unlock the receiver.

N/A

Call the Customer Service Center at 1-

800-894-9131. You must be able to

verify your account information with the

customer service representative.

Advertising