Dish Network Solo ViP 411 - Manual (Page 87)

Customizing Receiver
77
Using Caller ID
U
SING
C
ALLER
ID
If you subscribe to Caller ID from your local phone company and your receiver is
connected to a phone line, enabling the Caller ID feature allows the receiver to display the
names of people and/or telephone numbers as they call on your TV.
Setting Up Caller ID Display
Use these instructions to enable or disable Caller ID.
1
Press MENU and select System Setup. Select Installation and then Caller ID.
2
Select Enable Caller ID or Disable Caller ID.
3
Select Done.