Dish Network Solo ViP 411 - Manual (Page 96)

Chapter 10
86
Tips
2
Select Preferences, and then Inactivity Standby.
3
Highlight Activation and use the UP and DOWN ARROW buttons to switch between
Enabled and Disabled.
4
Highlight Inactivity Duration and use the UP and DOWN ARROW buttons to select the
amount of time the receiver waits before turning off.
5
Select Done.
Note: Select Defaults to reset the changes you’ve made to this feature.
T
IPS
• To take full advantage of Dolby Digital 5.1 surround sound, you need an optical cable
and a stereo that supports this feature.
• To use the Caller ID feature on this receiver, be sure to have the receiver connected to
an active phone line and subscribe to Caller ID service from your phone company.
Q
UESTIONS
• How can I see who has called me in the past? Open your Caller ID History by
pressing MENU, select System Setup and then Caller ID History.
• Why is my audio in another language? You may have selected an alternate lan-
guage.
• How can I change the channel order in the Program Guide? You can switch from
ascending order (lowest to highest) or descending order (highest to lowest).