Light control switch – Subaru 2008 Forester 2.5X User Manual

Page 131

Advertising
background image

Black plate (134,1)

北米Model "A8130BE-B" EDITED: 2007/ 7/ 25

3-20

Instruments and controls

set the minutes, press the

“M” button. To

reset the minutes to

“00” with a radio time

signal, push the

“Reset” button.

CAUTION

To ensure safety, do not attempt to
set the time while driving, as an
accident from inadequate attention
to the road could result.

NOTE

The clock uses a liquid crystal display.
You will find time indications hard to
see if you wear polarized glasses.

Light control switch

The light switch operates only when the
ignition switch is in the

“ON” position.

WARNING

To prevent battery discharge result-
ing from accidentally leaving your
lights on when your vehicle is
parked, the light switch operates
only when the ignition switch is in
the

“ON” position. In any other

position, the vehicle

’s lights will be

out.

If you park your vehicle on a road-
side at night, use the hazard warn-
ing flasher to alert the other drivers.

& Headlights

To turn on the headlights, turn the knob on
the end of the turn signal lever.

first position:

Parking lights, instrument panel illumina-
tion, front side marker lights, tail lights and
license plate light are on.

second position:

Headlights, parking lights, instrument pa-
nel illumination, front side marker lights,
tail lights, and license plate light are on.

Advertising
This manual is related to the following products: