Subaru 2008 Forester 2.5X - Manual (Page 322)

Black plate (331,1)
北米Model "A8130BE-B" EDITED: 2007/ 7/ 25
3. Having turned the wiper blade assem-
bly to the angle shown in the illustration,
pull it in the direction of the arrow to
remove it from the wiper arm.
1) Plastic support
4. Pull out the end of the blade rubber
assembly to unlock it from the plastic
support.
5. Pull the blade rubber assembly out of
the plastic support.
1) Metal spines
6. If the new blade rubber is not provided
with two metal spines, remove the metal
spines from the old blade rubber and
install them in the new blade rubber.
7. Align the claws of the plastic support
with the grooves in the blade rubber
assembly, then slide the blade rubber
assembly into place.
Securely lock the end of the plastic
Maintenance and service
11-41
– CONTINUED –
11