Subaru 2008 Forester 2.5X - Manual (Page 96)

Black plate (97,1)
北米Model "A8130BE-B" EDITED: 2007/ 7/ 25
Remote keyless entry system
CAUTION
. Do not expose the transmitter to
severe shocks, such as those
experienced as a result of drop-
ping or throwing.
. Do not take the transmitter apart
except when replacing the bat-
tery.
. Do not get the transmitter wet. If it
gets wet, wipe it dry with a cloth
immediately.
This device complies with Part 15 of
the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject
to the following two conditions: (1) This
device may not cause harmful inter-
ference, and (2) this device must
accept any interference received, in-
cluding interference that may cause
undesired operation.
Changes or modifications not ex-
pressly approved by the party respon-
sible for compliance could void the
user
’s authority to operate the equip-
ment.
Two transmitters are provided for your
vehicle.
The remote keyless entry system has the
following functions.
. Locking and unlocking the doors and
rear gate without a key
. Sounding a panic alarm
. Arming and disarming the alarm sys-
tem (if your vehicle is equipped with an
optional alarm system). See the next
section
“Alarm system” for detailed infor-
mation.
The operable distance of the keyless entry
system is approximately 30 feet (10
meters). However, this distance will vary
depending on environmental conditions.
The system
’s operable distance will be
shorter in areas near a facility or electronic
equipment emitting strong radio waves
such as a power plant, broadcast station,
TV tower, or remote controller of home
electronic appliances.
The keyless entry system does not oper-
ate when the key is inserted in the ignition
switch to prevent accidental lockout.
: LOCK/ARM button
Press to Lock all doors.
Press and Hold to activate panic alarm.
Press 3 times in a 5-second period to use
vehicle finder function.
: UNLOCK/DISARM button
1) Press once to Unlock driver ’s door.
2) Press a second time to Unlock all
other doors and rear gate.
& Locking the doors
Briefly press the “ ” button (for less than 2
seconds) to lock all doors and rear gate.
An electronic chirp will sound once and
the turn signal lights will flash once.
If any of the doors or the rear gate is not
fully closed, an electronic chirp will sound
5 times and the turn signal lights will flash
5 times to alert you that the doors or the
rear gate are not properly closed. When
Keys and doors
2-7
– CONTINUED –
2