Subaru 2008 Forester 2.5X - Manual (Page 134)

Black plate (137,1)
北米Model "A8130BE-B" EDITED: 2007/ 7/ 25
Illumination brightness con-
trol
When the headlight switch is in the “ ”
or “ ” position, you can adjust bright-
ness of the instrument panel illumination
for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
Headlight beam leveler (Ve-
hicle with HID headlights)
The HID headlights generate more light
than conventional halogen headlights.
Therefore a driver of an oncoming vehicle
may experience too much glare when your
headlight beam height adjustment is high
due to the vehicle carrying a heavy load.
The headlight beam leveler can be used
to adjust beam height to avoid such a
condition.
The higher the number the switch is
turned to, the lower the beam height
becomes.
Parking light switch
The parking light switch operates regard-
less of the ignition switch position.
By pushing the front end of this switch,
following lights will come on.
– Parking lights
– Front side marker lights
– Tail lights
– License plate lights
To turn off, push the rear end of the
parking light switch.
Avoid leaving these lights on for a long
time because that will run down the
battery.
Instruments and controls
3-23
3