Subaru 2008 Forester 2.5X User Manual

Page 46

Advertising
background image

Black plate (47,1)

北米Model "A8130BE-B" EDITED: 2007/ 7/ 25

plate rearward.

2. Pull out the seatbelt slowly from the
overhead retractor.

1)

Seatbelt comfort guide

3. Pass the seatbelt through the seatbelt

comfort guide located beside the head
restraint.

4. After confirming that the webbing is not
twisted, insert the connector (tongue)
attached at the webbing end into the
buckle on the right-hand side until a click
is heard.
If the belt stops before reaching the
buckle, return the belt slightly and pull it
out more slowly. If the belt still cannot be
unlocked, let the belt retract slightly after
giving it a strong pull, then pull it out slowly
again.

5. Insert the center seatbelt tongue plate
into the center seatbelt buckle marked

“CENTER” on the left-hand side until it
clicks.

6. To make the lap part tight, pull up on
the shoulder belt.

Seat, seatbelt and SRS airbags

1-17

– CONTINUED –

1

Advertising
This manual is related to the following products: