Brake fluid – Subaru 2008 Forester 2.5X User Manual

Page 306

Advertising
background image

Black plate (315,1)

北米Model "A8130BE-B" EDITED: 2007/ 7/ 25

& Recommended fluid

Use one of the following types of auto-
matic transmission fluid.

Genuine Subaru Automatic Transmis-
sion Fluid Type-HP
“Dexron III” Type Automatic Transmis-
sion Fluid

Brake fluid

& Checking the fluid level

WARNING

. Never let brake fluid contact your

eyes because brake fluid can be
harmful to your eyes. If brake
fluid gets in your eyes, immedi-
ately flush them thoroughly with
clean water. For safety, when
performing this work, wearing
eye protection is advisable.

. Brake fluid absorbs moisture

from the air. Any absorbed moist-
ure can cause a dangerous loss
of braking performance.

. If the vehicle requires frequent

refilling, there may be a leak. If
you suspect a problem, have the
vehicle checked at your SUBARU
dealer.

CAUTION

. Never use different brands of

brake fluid together. Also, avoid
mixing DOT 3 and DOT 4 brake
fluids even if they are of the same
brand.

. When adding brake fluid, be care-

ful not to allow any dirt into the
reservoir.

. Never splash the brake fluid over

painted surfaces or rubber parts.
Alcohol contained in the brake
fluid may damage them.

. Be careful not to spill brake fluid

when adding it. If brake fluid
touches the exhaust pipe, it may
cause a bad smell, smoke, and/or
a fire. If brake fluid gets on the
exhaust pipe, be sure to wipe it
off.

Check the fluid level monthly.
Check the fluid level on the outside of the
reservoir. If the level is below

“MIN”, add

the recommended brake fluid to

“MAX”.

Maintenance and service

11-25

– CONTINUED –

11

Advertising
This manual is related to the following products: