Subaru 2008 Forester 2.5X - Manual (Page 229)

Black plate (236,1)
北米Model "A8130BE-B" EDITED: 2007/ 7/ 25
7-28
Starting and operating
Cruise control
WARNING
Do not use the cruise control under
any of the following conditions. This
may cause loss of vehicle control:
. driving up or down a steep grade
. driving on slippery or winding
roads
. driving in heavy traffic
Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal and it is
operative when the vehicle speed is 25
mph (40 km/h) or more. Make sure the
main switch is turned
“OFF” when the
cruise control is not in use to avoid
unintentionally setting the cruise control.
NOTE
If you move the cruise control lever or
press the main switch button while
turning the ignition switch
“ON”, the
cruise control function is deactivated
and the
“CRUISE” indicator light
flashes. To reactivate the cruise control
function, turn the ignition switch back
to the
“Acc” or “LOCK” position, and
then turn it again to the “ON” position.
& To set cruise control
1. Push the main switch button.
The “ ” indicator light on the combina-
tion meter will come on.
2. Depress the accelerator pedal until the
vehicle reaches the desired speed.
3. Push the control lever downward in the
“SET/COAST” direction and release it.
Then release the accelerator pedal.
At this time, the “ ” indicator light is