Turn signal lever – Subaru 2008 Forester 2.5X User Manual

Page 133

Advertising
background image

Black plate (136,1)

北米Model "A8130BE-B" EDITED: 2007/ 7/ 25

3-22

Instruments and controls

is dark outside.

The low beam headlights will automati-
cally come on at reduced brightness when
the engine has started, under the following
conditions:
. The parking brake is fully released.

. The light switch is in the “OFF” or “

position.
. The automatic transmission selector
lever is set at other than the

“P” position.

Turn signal lever

1)

Right turn

2)

Left turn

3)

Lane change for right

4)

Lane change for left

To activate the right turn signal, push the
turn signal lever up. To activate the left
turn signal, push the turn signal lever
down. When the turn is finished, the lever
will return automatically. If the lever does
not return after cornering, return the lever
to the neutral position by hand.

To signal a lane change, push the turn
signal lever up or down slightly and hold it
during the lane change. The turn signal
indicator lights will flash in the direction of
the turn or lane change. The lever will

return automatically to the neutral position
when you release it.

Advertising
This manual is related to the following products: