Subaru 2008 Forester 2.5X - Manual (Page 330)

Black plate (339,1)
北米Model "A8130BE-B" EDITED: 2007/ 7/ 25
2. Remove the retainer spring, then pull
out the bulb and electrical connector unit.
3. Disconnect the electrical connector
from the bulb.
4. Install a new bulb into the electrical
connector, then set the retainer spring
securely.
5. Install the bulb cover.
! High beam light bulbs
1. Disconnect the electrical connector
from the bulb.
2. Remove the bulb from the headlight
assembly by turning it counterclockwise.
3. Replace the bulb with new one.
4. Reconnect the electrical connector. At
this time, use care not to touch the bulb
surface.
5. To install the bulb to the headlight
assembly, turn it clockwise until it clicks.
Maintenance and service
11-49
– CONTINUED –
11