Brake booster, Brake pedal – Subaru 2008 Forester 2.5X User Manual

Page 308

Advertising
background image

Black plate (317,1)

北米Model "A8130BE-B" EDITED: 2007/ 7/ 25

& Recommended clutch fluid

FMVSS No. 116, fresh DOT 3 or DOT 4
brake fluid

CAUTION

Avoid mixing DOT 3 and DOT 4
brake fluids even if they are of the
same brand.

Brake booster

If the brake booster does not operate as
described in the following, have it checked
by your SUBARU dealer.
1. With the engine off, depress the brake
pedal several times, applying the same
pedal force each time. The distance the
pedal travels should not vary.
2. With the brake pedal depressed, start
the engine. The pedal should move
slightly down to the floor.
3. With the brake pedal depressed, stop
the engine and keep the pedal depressed
for 30 seconds. The pedal height should
not change.
4. Start the engine again and run for
approximately one minute then turn it off.
Depress the brake pedal several times to
check the brake booster. The brake
booster operates properly if the pedal
stroke decreases with each depression.

Brake pedal

Check the brake pedal free play and
reserve distance according to the main-
tenance schedule in the

“Warranty and

Maintenance Booklet

”.

& Checking the brake pedal

free play

1)

0.02

– 0.08 in (0.5 – 2.0 mm)

Stop the engine and firmly depress the
brake pedal several times. Lightly press
the brake pedal down with one finger to
check the free play with a force of less
than 2 lbs (10 N, 1 kg).
If the free play is not within proper
specification, contact your SUBARU deal-
er.

Maintenance and service

11-27

– CONTINUED –

11

Advertising
This manual is related to the following products: