2 display and error messages – Doremi Dimension3D User Manual

Page 14

Advertising
background image

2.2.2 Display and Error messages

•

The Dimension-3D front panel displays two lines of information: top line for input and
bottom line for output.

•

D/S: SDI 1080p 29 means Dual Stream SDI input is at 1080p-29 (top line)

•

S/S: HDM 1080p 60 means HDMI output is set to Side/Side 1080p 60 (bottom line)

•

The Dimension-3D can display two types of errors on the front panel display:

•

If the top line shows: "OFF:Not supported," the input format is not supported like the SD-
SDI or any non-video rate HDMI formats.

•

If the bottom line shows: "OFF: Err 1080p 60," the 3D mode selected is not supported.

•

When the unit displays any of the two messages above the output format will be forced.

•

If the output interface is HDMI, the output format will be set to 1080p-60.

•

If the output interface is SDI, the output format will be forced to 1080p-24.

DM3.OM.001026.DRM

Page 14

Version 1.6

Doremi Labs

Advertising
This manual is related to the following products: