Doremi Dimension3D - Manual (Page 26)

3.9.1 Presets
• The Dimension-3D includes 3 Presets which allow you to save different settings
configurations using the Save menu. These presets can then be loaded by using the Recall
menu.
• To save the current settings configuration to a preset:
• Go to the System menu and select “Save”
• Turn the jog wheel and select which preset to save the current settings to.
• The choices are Default, Preset 1, Preset 2 and Preset 3. Choosing Default
will save the current settings to the default settings on power up.
• Press select to save the current settings to the selected preset. Once the settings
are saved a “#” sign will appear next to the preset title.
• To Load settings from a saved preset:
• Go to the System menu and select “Recall”
• Turn the jog wheel to select which settings Preset you want to load.
• The choices are Default, Preset 1, Preset 2, Preset 3 and Factory. Choosing
factory will load the factory default settings.
• Press select to load the selected preset settings. Once the settings are loaded a “#”
sign will appear next to the preset title.
3.10 Status Menu
• The Status menu can be used to view the Input and Output information:
Sub-Menu Description
In:
Out:
Input status information
Input status information
DM3.OM.001026.DRM Page 26 Version 1.6
Doremi Labs