Doremi Dimension3D - Manual (Page 6)

Protecting Yourself and the Dimension-3D
Never touch the AC plug with wet hands. Always disconnect the Dimension-3D from the power
supply by pulling on the plug not the cord. Allow only a Doremi Labs dealer or qualified
professional engineer to repair or reassemble the Dimension-3D. Apart from voiding the warranty,
unauthorized engineers might touch live internal parts and receive a serious electric shock. Do not
put, or allow anyone to put any object, especially metal objects, into the Dimension-3D.
If water or any other liquid is spilled into or onto the Dimension-3D, disconnect the power and call a
Doremi dealer. The unit must be well ventilated and away from direct sunlight. To avoid damage to
internal circuitry, as well as the external finish, keep the Dimension-3D away from direct sources of
heat (heater vents, stoves, radiators). Avoid using flammable aerosols near the Dimension-3D.
They can damage the surface area and may ignite. Do not use denatured alcohol, paint thinner, or
similar chemicals to clean the Dimension-3D. This can damage the unit.
Modification of this equipment is dangerous and can result in the functions of the Dimension-3D
being impaired. Never attempt to modify the equipment in any way. In order to ensure optimum
performance of the Dimension-3D, select the setup location carefully and make sure the equipment
is used properly. Avoid setting up the Dimension-3D in the following locations:
• In a humid or dusty environment.
• In a room with poor ventilation.
• On a surface which is not level.
• Inside a moving vehicle where it will be subject to vibration.
• In an extremely hot or cold environment.
DM3.OM.001026.DRM Page 6 Version 1.6
Doremi Labs