Doremi Dimension3D - Manual (Page 15)

3 Dimension-3D Front Panel Controller
Note: Throughout this section the phrase “press Select” refers to pressing the front panel scroll
wheel button of the Dimension-3D (Figure 2).
3.1 Quick Setup Information
• Setting up the Dimension-3D for a specific environment involves changing four main
parameters:
1) Input Interface
2) Input 3D format
3) Output Interface
4) Output 3D format
• The Dimension-3D has many other parameters that can be changed and will be discussed
later in this manual, but the four parameters listed above are the most used.
DM3.OM.001026.DRM Page 15 Version 1.6
Doremi Labs