Doremi Dimension3D - Manual (Page 19)

3.4 Output Menu
• The following menu can be used to set up the output parameters:
Sub-Menu Value Description
Interface HDMI
SDI Set the active output. For
common video formats, both
outputs can be active
simultaneously.
SDI 3D mode Off
Side by Side
Top Bottom
Line by Line
Dual Stream
Left eye
Right eye Set the SDI output 3D mode
Left eye and Right eye modes
are used in dual projection 3D
installations with HDMI input.
You need to use one Dimension
3D per projector.
SDI Frequency Match Input
23.98
24
25
29.97
30
50 (720 formats only)
59.94 (720p formats
only)
60 (720p formats only) Set the SDI output frame rate
Match Input: In this mode, the
SDI output frame rate will be
equivalent to the input source.
SDI color Auto
RGB
RGB ext
YCbCr 709
YCbCr 709 ext
XYZ’ Set the SDI output color mode
Auto: Equivalent to 709
Ext: designates extended color
range (full bandwidth) as
opposed to limiting the color
spectrum to comply with ITU
standards.
DM3.OM.001026.DRM Page 19 Version 1.6
Doremi Labs