KLING & FREITAG K&F SEQUENZA 10 W - Manual (Page 24)

User's manual K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2014 Version Version 6.1 Page 24 of 70
10.1.2 Array with SEQUENZA 10 B
Warning
Control the secure fit of every ball lock pin during setup. As long as you do not push the
button in the middle of the pin, you should not be able to pull out the pin.
You may fly up to max. 12 SEQUENZA 10 B on the flying frame.
Connect the speakers as follows:
1.
Slide the 4 joint plates out of the
speaker by reaching into the access
opening (A) and pushing the plates
forwards.
Secure the joint plates(B) with the
Quick Release Pins(C).
2.
If you are planning a cardioid or
hypercardioid use, lay the middle
one of the 3 subwoofers with its
rear side onto the wheel board
before you connect the speakers
Further instructions for cardioide or
hypercardioide uses beginning on
page 40.
Push the speakers together so
that the 4 joint plates of the
one speaker protrude into the
corresponding connecting bracket
of the other speaker.