KLING & FREITAG K&F SEQUENZA 10 W - Manual (Page 47)

User's manual K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2014 Version Version 6.1 Page 47 of 70
17.4 Fixating the Cables
The array may not be used as a climbing
aid.
Fixate the cable to relieve the connectors.
In doing this, bear in mind that if you
fixate the cable on the cable pick in a
one-point rigging, the weight of the
cable can change the angle.
It is, therefore, only recommendable
to fixate the cable on the cable pick in
a two-point rigging. If necessary, use a
separate cable pick. Cable Pick
18. Transport and Storage
All metal components are protected against short-term moisture with a coating.
SEQUENZA 10The accessories has to be stored, transported and used in a dry enviroment.
The SEQUENZA 10 System is not designed for long-term use in a corrosive environment.
Make sure that the system is adequately ventilated during longer storage periods so that
possible residual moisture can escape from the equipment.
Furthermore, you should ensure that all components of the SEQUENZA 10 System are
protected from mechanical strain to prevent possible damage.
We recommend using suitable transport and storage cases and the optional soft cover that
protects from the above-mentioned influences.
19. Maintenance and Care
For the owner and user, it is mandatory to be aware of the fact that rigging systems are
highly safety critical.
Please note that the mains cables are delivered with varying connector options or with open
wires (mains side), depending on the country or order number.
The inspection requirements vary depending on application and country of use. Observe the
requirements that are relevant for you. If in doubt, contact local authorities.
In many countries, regular inspection of mounting components and accessories is required. It
is thus recommendable to carry through such an inspection for your own safety, too. In most
cases (e.g. german BGV C1), an additional annual inspection is required that must be done by
a technical expert. Additionally, a detailed inspection carried through by a legally certified or
official authority is required every four years.
In this context, it is very important to keep an inspection log book. In this inspection log
book, the data for every used accessory is entered at the periodic inspections, making the
data available at all times for possible inspections.
In addition an inspection book for the rigging components of the SEQUENZA 10 system
should be kept and maintained carefully. SEQUENZA 10This book should document
maintenance measures and inspection intervals and contain parts lists.