KLING & FREITAG K&F SEQUENZA 10 W - Manual (Page 53)

User's manual K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2014 Version Version 6.1 Page 53 of 70
21.3 Technical Specifications SEQUENZA 10 B
Design Bass reflex system
(via K&F SystemRack or K&F TOPAS)
Crossover frequencies (2-Way-Mode / 60
Hz) 100Hz / 60 Hz
Lower cut-off frequency (-3 dB / -10 dB) 39 Hz / 33 Hz
Coverage Omnidirectional (optional
in clusters of three via CD 44)
Power handling
1800 W nominal
1)
3600 W program
2)
Max. SPL 133 dB
Components 2 x 15“ long excursion chassis, 10mm
voice
coil with double centring, internal and
external ven-
tilation, double demodulation ring for
minimal
distortion
Impedance (nominal) 4 Ohm
Connection Rear: 2 x Speakon 4-pin NLT4MP (1+ / 1-)
2 IN parallel into 2 OUT
Front: 1 x Speakon 4-pin NLT4MP (1+ / 1-)
Enclosure Design 15 mm frame reinforced multiplex
plywood enclosure
with highly resilient Polyurea synthetic
black,
coating, K&M mounting plate with M20
thread for
distance rod, 'Snap&Fly' compatible
4-point rigging system, 8 butterfly
handles,
10 plastic sliding feet, 10 stacking grooves
for
save stackings of identical enclosures,
locking profiles for transport cover
Dimensions (W x H x D) 807 x 470 x 850 (without castors)