KLING & FREITAG K&F SEQUENZA 10 W User Manual
Page 36
User's manual
K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2014
Version Version 6.1
Page 36 of 70
4.
Take the stacking link out of the
park position and set it to the
desired position.
5.
Take the rear Quick Release Pins on the first speaker out of the park position.
6.
Pull the spring bolt out and hold it. Pull out the joint plate approx. 10 cm towards the
spring bolt and then let go of the spring bolt. By doing this, the rear joint plate is no
longer in the way when the speaker is stacked and then connected with the stacking link.
7.
Place the speaker on the frame.
Make sure that the hinged fittings
protrude between the joining
plates on the speaker.
8.
Secure the front connections with the Quick Release Pins from the speaker.
Risk of crushing hands! When
lowering the speakers, there is the
risk of crushing your hands while
the enclosure parts move towards
each other. Make sure that you do
not lower the speaker with jolting
movements.