Lsblocks for cardioid use, Sequenza 10 b combined with other k&f tops, 2 lsblocks for cardioid use – KLING & FREITAG K&F SEQUENZA 10 W User Manual
Page 43
User's manual
K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2014
Version Version 6.1
Page 43 of 70
14.2
LSBlocks for cardioid use
The rear-facing subwoofer is controlled using the Controller CD 44 via LSBlock for cardioid /
hypercardioid arrays for rear-emitting subwoofers. The front-facing subwoofers are
controlled via LSBlock for cardioid / hypercardioid arrays for front-emitting subwoofers. The
following cardioid or hypercardioid setups are available in the CD 44:
Operation Mode of the SEQUENZA 10 B
LSBlocks (SEQUENZA 10 N/W)
'Cardioid Front', front-facing
Seq10B C-F
'Cardioid Rear', rear-facing
Seq10B C-R
'Hypercardioid-Front', front-facing
Seq10B HC-F
'Hypercardioid-Rear', rear-facing
Seq10B HC-R
'Infrabass Cardioid Front', front-facing
Seq10B C-F60Hz
'Infrabass Cardioid Rear', rear-facing
Seq10B C-R60Hz
'Infrabass Hypercardioid Front', front-
facing
Seq10B HC-F60Hz
'Infrabass Hypercardioid Rear', rear-facing
Seq10B HC-R60Hz
15. SEQUENZA 10 B combined with other K&F tops.
The SEQUENZA 10 B can also be combined with other K&F tops – in addition to the
SEQUENZA 10 N/W systems – using the Controller CD 44.
•
To do so, select the desired LS blocks for the top in the Controller CD 44 or systemamp
TOPAS, and combine these with the desired LS block for the SEQUENZA 10 B.
In the respective Hardware Manuals, you will find detailed descriptions about connecting
the SEQUENZA 10 speakers and the settings necessary on the System Controller CD 44.
SEQUENZA 10 B
On the top side of the subwoofer, there is a threaded flange (M20) for screwing in an
optionally available distance rod.
All K&F tops with a flange connector or an assembled stand adapter can be placed onto this
distance rod.
Warning
When you assemble a top onto a subwoofer using a distance rod, the structural safety is
reduced. In this case, you must take suitable measures in order to guarantee the structural
safety.
For subsequent repositioning, always remove the top speaker that has been positioned using
a distance rod.