Xilica Uno Series - Manual (Page 16)

Uno Series - Quick Start Guide
XILICA AUDIO DESIGN CANADA / EUROPE / ASIA – www.xilica.com
Pag
e
16
(6) Once the Component Libraries menu on the left is not required it can be minimized to provide
more space to arrange items. The Component Properties menu on the right can remain open
until you label all your wired I/O Source and Destination connections (described on Page 17 -
#17). Then it too can be minimized. Both shown below.
(7) Double clicking on any DSP module opens that module so you can make parameter adjustments
to each DSP module as required – as shown below.
(8) Double clicking on the Analog Input DSP module provides parameter access to the master input
Polarity, Mute, Digital Trim & Meters. Plus, via a secondary button located within the opened
Input module, the processors Mic/Line Pre-Amp parameter controls
– as shown below.
(9) Click the grey “Mic/Line Pre-Amp Setup” button in the opened Analog Input module (above left)
to open the processors Mic/Line Pre-Amp module (above right) to make parameter adjusts to
the processors Mic/Line Pre-Amp - Mic/Line selection, phantom power and analog trim.