Xilica NeuPanel Series - Manual (Page 15)

NeuPanel Series - Mini - Quick Start Guide
XILICA AUDIO DESIGN CANADA / ASIA / EUROPE
Pag
e
15

To select the parameter function to be programmed and controlled, p ress and hold your PC’s
control key and then left click to highlight the parameter you want to program into the Mini
control from within the opened Analog Input module. In our example as shown below right,
we clicked on the Input #1 Level Parameter.
Once selected, level #1 will change color and will have an orange highlight around it.

Next, drag and drop the highlighted Level parameter function onto the level control of the
Mini S4K1 wall control in the work area and release it there. Once released the Level control
on the Mini device will turn light red and is highlighted with an orange line around it to indicate
that it has been programmed successfully - as shown below left.
N
Note: If the parameter you highlight and drag & drop onto the Mini control can be programmed
into the Mini
– that Mini control function will turn bright green as you approach it to drop the
control parameter into it. If it displays bright red - it cannot be programmed into that position.