Xilica NeuPanel Series - Manual (Page 16)

NeuPanel Series - Mini - Quick Start Guide
XILICA AUDIO DESIGN CANADA / ASIA / EUROPE
Pag
e
16

Let ’s program a second parameter control function into the Mini control. Press and hold your
PC’s control key and then left click to highlight the Input #1 Mute parameter in the opened
Analog Input module
– as shown below right.

Now drag and drop the highlighted Mute parameter function onto the first On/Off Push
Button on the Mini control and release it there. Once released the On/Off push button on the
Mini device will turn light red and is highlighted with an orange line around it to indicate that it
has been programmed successfully - as shown below left.

Continue to further program the balance of the Mini S4K1 push button controls as required
(and any other Mini controls you drag and drop into the Project View work area) to satisfy
your control needs using any viable parameter function from any DSP module & preset in
your DSP design.