Xilica NeuPanel Series - Manual (Page 19)

NeuPanel Series - Mini - Quick Start Guide
XILICA AUDIO DESIGN CANADA / ASIA / EUROPE
Pag
e
19
20. Online Mode:
Once the devices are finished being prepared you are in Online Mode and the Mini S4K1
wall control and the processor are Online and Active/Live.

Note above that the menu bar at the top of the Online Mode work area page, the Mini
Control, and the Design Project Schematic are now Red (not blue) to indicate being in
Online Mode.

Note that the Design Mode label at the top center of the page has changed to “Online
Mode” and that the “Switch to Online Mode” button has been re-named “ Switch to Design
Mode ” and is Blue now - not red.
Thus you are able to quickly switch back and forth between Online Mode and Design Mode.

Note that the dotted design mode work area is now a plain white background.

Note the added green “Mute All Devices” button at the top of the Online Mode page – on
the menu bar between the System Presets button and the Zoom control.

Note that when visible or when you collapse the design schematic back to the Mini control
(and processor) module view in Online Mode - the Mini (and processor) device model has a
green indicator beside both to indicate that both devices are connected
– and that you are
Online and Active.
21. Switching Back from Online Mode to Project View/Design Mode:
You cannot make changes to the Mini devices while in Online Mode – that can only be
accomplished while in Project View/Design Mode.
(But, you can make adjustments to the processors DSP module parameters while in Online Mode
thus you will see a permissions window upon switching back to Design Mode from Online Mode.
That is related to saving changes made to the processor while in Online Mode back to the PC
project file in Design mode and not the Mini control devices. See the processors Quick Start
Guide for instructions to accomplish and safely manage that)