Xilica NeuPanel Series - Manual (Page 20)

NeuPanel Series - Mini - Quick Start Guide
XILICA AUDIO DESIGN CANADA / ASIA / EUROPE
Pag
e
20
22. Working Offline:
Of course you can program the Mini wall controls (and work on a DSP design project) and save
your work to a file while
“Offline” - with no Mini (or processor) devices connected. Then later,
connect the Mini device (and processor); Open your saved design project; Map both devices;
and Transfer/save your saved Mini programming (and DSP design work from your saved file) to
the connected physical Mini control (and processor) devices by selecting the
“Switch to Online
Mode” button (as described and shown above).
23. New Design Project:
New Design Project or New Project is where we start a new DSP design project from scratch. In
the example instructions above we added and programmed the Mini wall control after the DSP
design project was already completed and saved to the PC.
Thus we started from “Open Design
Project” or “Open Project” to access our saved DSP design project and then proceeded to add
the required Mini control model to the design and to program each of its control functions.
You could of course, have added the Mini wall controls required to your DSP design project in the
early stages of a DSP design using our Neutrino processor or in conjunction with our Uno
processor (after downloading an Uno App) - both starting from scratch using New Design Project
or New Project.
24. Component Properties Menu:
The Component Properties menu on the right side of the Project View/Design Mode work area
provides the means to alter the specific characteristics of each individual DSP Modules and to
make other changes when the NeuConsole software is used in conjunction with a Neutrino Series
DSP only. For the Mini Series controls, fewer Component Properties can be changed or named
but include
– changing the Component Name/Label (NeuPanel-Mini-S4K1 to Lobby Control etc),
its Position on work area and its Appearance information.
25. Additional Operational Guidance:
That should get you connected, operational, and the Mini wall controls programmed and
functioning.

For more detailed operational guidance please see the detailed User info that can be viewed
in the NeuConsole
software’s “Help File”, the Help File as saved on the USB drive packaged
with each processor (this Quick Start Guide can be found in both locations as well), our web
sites Product Tutorials, or contact Xilica via our web site or this guides contact information on
page 1.
Again, from everyone here at Xilica Audio Design, thank you for your support of
our digital processors and products.
Kind regards,
Barry Steinburg
[email protected]
miniquickstartguide-v2.1-fw5.2.0-sw5.2.0