Xtramus DApps-TAP V1.3 - Manual (Page 15)

3.4. NuDOG-801 Interface Ports
NuDOG-801C Hardware Overview
A LEDs LEDs that displays NuDOG-801C’s status.
B Mini-USB Port*
5 Pin Mini-B Receptacle USB Port. You can manage, configure,
or update firmware/FPGA when connecting NuDOG-801C to
your PC. While under TAP mode, this mini-USB port can also
re-direct tapped packets to PC.
C Power Jack 12V DC Power Jack for connecting external power adapter.
D Cooling FAN Fan hole with internal fan for ventilation.
E Diagnostic Port 8-Pin Mini-DIN Receptacle Diagnostic Port
F
10 Gigabit Wirespeed
SFP+ Port
10 Gigabit Wirespeed SFP+ Port
*Please note that when connecting NuDOG-801C with PC via its USB port, DO NOT use a USB hub
15
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®