Xtramus DApps-TAP V1.3 - Manual (Page 26)

6. DApps-TAP Overview
6.1. Starting DApps-TAP
Before starting DApps-TAP, your PC and NuDOG-301C/NuDOG-801/NuDOG-101T shall be connected
properly. The figure down below illustrates connecting PC and NuDOG-301C. You can connect
NuDOG-101T or NuDOG-801 with PC in the same manner.
6.2. Starting DApps-TAP
There are two ways to start DApps-TAP:
Starting DApps-TAP
• Click Start Æ Programs Æ Xtramus Æ
DApps-TAP.
• Double-click DApps-TAP icon located on
your PC’s desktop.
26
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®