Xtramus DApps-TAP V1.3 - Manual (Page 42)

Port AB_Capture Criteria
In the Protocol interface, If you click the
Capture all packets function, you will
enable the DApps-TAP to capture all
packets criteria.
If you close the Capture all packets
function, than the criteria from MAC,
Network and Protocol will be available
to choose.
The Packet length filter allows you to
filter packets as equal, less than,
greater than and not equal to a range of
packets of 52~16384 bytes.
SDFR (Self-Discover Filtering Rules).
If you closed the Capture all packets
function in the Protocol interface, the
SDFR interface will be available for
settings.
The SDFR interface allows you to
choose a single or multiple criteria for
capturing packets.
It shows the result of capture criteria by
user's selection.
*Note: Packet loss is possible if the captured traffic is higher than traffic allowed for USB port.
*Note: For SDFR items, you can tick the items that act as criteria. When you tick one option, some other options will
be gray. It means the option what you tick has covered the range of those options in gray.
42
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®