Port a / port b, Media type, capture criteria, loopback and alarm, Media status – Xtramus DApps-TAP V1.3 User Manual
Page 48
7.3.3. Port A / Port B
7.3.3.1. Media Type, Capture Criteria, Loopback and Alarm
By clicking the Port A or Port B on the System Info/Configuration List, the Port A or Port B
Configuration screen will be shown on the Main Display Screen located on the right side of
DApps-TAP’ main window, allowing you to make settings for NuDOG-301C /801/101T ports.
Those settings include the Media Type, Capture Criteria, Loopback and Alarm related to
and
. Besides, the change on the status of Media Type, Capture Criteria, Loopback and Alarm are
also shown in the System Info/Configuration.
For more detail description about Port A or Port B Configuration, please refer to 7.2.5. Port AB
.
7.3.3.2. Media Status
By clicking the Media Status on the System Info/Configuration List, it will show the status of Link,
Speed, Mode, Type, Flow Control and Rate Control.
48
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®