Xtramus DApps-TAP V1.3 - Manual (Page 27)

If your PC is not connected with NuDOG-301C/801/101T, you can still run DApps-TAP under Demo Mode.
Almost all DApps-TAP’s functions are available under Demo Mode. However, please note that Demo
Mode is for system demo purposes only, and does not serve any testing purposes at all.
When your PC cannot detect your NuDOG-301C/801/101T, a window as shown above will pop up asking
if you want to start the DApps-TAP in Demo mode or not, also a third option will pop up asking if you want
to re-install WinPcap for successfully run the DApps-TAP.
27
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®