Xtramus DApps-TAP V1.3 - Manual (Page 38)

7.2.4. Chart
Chart_Line
Click the Chart button to pop up the Chart window shown above. From A bar, you can click
the button to see Packets status in line chart as shown in B field. The lines shown in
the chart depends on the parameters chosen in C field.
You can set the Rate of packets to be analyzed in Mbps in D field. If you set in Auto mode,
the Rate will be set under a default setting, if you set in User Define mode, than a Minimum
and a Maximum rate range will be available to modify.
You can open a saved chart by clicking the button from A bar. When opening a saved
chart, the Start/End Time scroll field from E will be available. The function of Start/End
Time allows you to check the status of the packets of the saved chart in different times.
The Update button / allows you to pause or start the counter operation.
38
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®