Xtramus DApps-TAP V1.3 - Manual (Page 39)

Chart_Pie
Click the button as shown in A to view the pie chart in B field. The pie chart shows the
percentage of each captured packet size during the operation of the DApps-TAP.
You can set the Rate of packets to be analyzed in Mbps in C field. If you set in Auto mode,
the Rate will be set under a default setting, if you set in User Define mode, than a Minimum
and a Maximum rate range will be available to modify.
You can open a saved chart by clicking the button. When opening a saved chart, the
Start/End Time scroll field from D will be available. The function of Start/End Time allows
you to check the status of the packets of the saved chart in different times.
39
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®