Xtramus NuApps-2544-RM V1.3 - Manual (Page 23)

23
4.2. Quick Launch Buttons
These Quick Launch Buttons allow you to reconnect NuStreams-2000i/600i, open/save configuration
files, module port configuration, test configuration, and view test reports. Please refer to the section down
below for more detail descriptions regarding to Quick Launch Buttons.
Reconnect
If the connection between your PC and NuStreams-2000i/600i is down, a “Disconnected” icon
will be shown in “System Connection Status”.
Press Reconnect button to re-establish the connection between your PC and
NuStreams-2000i/600i. If the connection has been established successfully, a message window will
pop up, and the “System Connection Status” will be shown as “Connected”
.
Open
If you have a previously saved configuration
file stored in your PC, you can load it and
apply all the setting you’ve made by clicking
Open button on the Quick Launch Buttons.
Configuration files are saved in the format of
“＊.xml”, and are named with Tester Name,
DUT Name, and the date/time when the files
are created.
Save
You can save the current test settings with
the Save button on the Quick Launch
Buttons.
Configuration files are saved in the format of
“＊.xml”, and are named with Tester Name,
DUT Name, and the date/time when the files
are created.
Test results and related statistic are available
and can be viewed with the “＊.xml” file you
saved this way. You need Microsoft Excel®
to view “＊.xml” file.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®