Xtramus NuApps-2544-RM V1.3 - Manual (Page 35)

35
Many to One
In Many to One test mode, packets will be sent from one destination port to multiple source ports as
shown in the figure above.
Port Pairing/Assigning for Many to One Mode
1. Choose a port that will serve as the
destination port from the Destination Port
field.
2. Choose ports that will serve as the source
port from the Available Ports field.
3. Click the 〈 button to add the source port
you’ve selected in step 2.
4. The port you’ve selected will be added to
the Source Port field. You can remove one
source port by clicking the 〉 button, or
remove all source ports by clicking the 〉
〉
button.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®