Xtramus NuApps-2544-RM V1.3 - Manual (Page 24)

24
Port Config
By clicking the Port Config button, the Port
Configuration screen will be shown on the
Main Display Screen located on the right side
of NuApps-2544-RM’s main window, allowing
you to make settings for the module ports.
Settings such as port transmitting rate,
auto-negotiation, and protocol are available
and can be set here.
For more detail description about Port
Configuration, please refer to 4.8. Port
Configuration.
Test Config
By clicking the Test Config button, the Test
Configuration screen will be shown on the
Main Display Screen located on the right side
of NuApps-2544-RM’s main window, allowing
you to make test settings.
You can set 4 different test modes here,
including Throughput, Latency, Packet
Loss, and Back to Back.
For more detail description about Port
Configuration, please refer to 4.9. Test
Configuration.
Report
The Report button allows you to view test
results, charts, and statistics on the Main
Display Screen located on the right side of
NuApps-2544-RM’s main window, allowing
you to make test settings.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®