Xtramus NuApps-2544-RM V1.3 - Manual (Page 33)

33
One to One
In One to One test mode, packets will be sent from one source port to one destination port as shown in
the figure above.
Port Pairing/Assigning for One to One Mode
1. Choose a port that will serve as the source
port from the Source Ports field.
2. Choose a port that will serve as the
destination port from the Destination
Ports field.
3. Click the 〉 button to add the port pair you
set in step 1~2.
4. The port pair will be added to the Test Port
Pair field. You can remove the selected port
pair by clicking the 〈 button, or remove all
port pairs by clicking the 〈
〈 button.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®