Xtramus NuApps-2544-RM V1.3 - Manual (Page 38)

38
4.9.2. Test Configuration Overview
NuApps-2544-RM supports four different tests including:
Diagram Description
Throughput test determines the DUT’s maximum capable
throughput rate without dropping any packets.
Latency test measures the time it takes for the DUT to forward a
packet.
Packet Loss test measures the percentage of packets that are not
forwarded due to the lack of resource.
Back to Back test measures DUT’s buffer capacity by sending
bursts of traffic at the maximum frame rate and measuring the
longest burst size without dropping any packets.
To start performing tests with NuApps-2544.RM, please check the check box
in front of the test you would like to perform first. Unchecked tests will not
be performed, and you cannot access their reports as well during or after the
tests.
You can access setting options for the tests you would like to perform by:
Accessing Test Setting Pages
• Click the test you would like to configure
located on System Info/ Configuration
List
• Click the test you would like to configure
located on the test tab menu.
For more detailed setting options regarding to Throughput, Latency, Packet Loss and Back to Back,
please refer to the sections down below.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®